botek® America offers single flute gundrills in solid carbide, brazed-tip and indexable designs, with diameters from 0.5 mm (0.0197 in) up to 113.99 mm (4.4878 in). Pick a type below, or send your drawing and an application engineer will help match the tool to your hole. New to gundrilling? Read our gundrilling process guide.
Why buy single flute gundrills from botek® America
botek® America is the U.S. division of botek Präzisionsbohrtechnik GmbH. We bring botek deep hole drilling tools to US shops and back them with engineering and service from Roselle, Illinois.
Application engineering
Send your drawing, material and hole requirements. An application engineer reviews them and helps you choose the tool type and diameter.
Submit your applicationRegrinding in Roselle
Worn gundrills can be reground at our Roselle, Illinois facility instead of replaced. Tell us the tool type and diameter and we confirm what is possible.
See the regrinding serviceTest on your application
Customer testing and trials let you see how a tool performs on your own application.
See customer testingSpecial tools to your drawing
If no standard type fits, send a drawing. botek designs special tools, and the specification page explains what we need.
How to specify a custom toolSingle flute gundrills by type and diameter range
The range map shows every botek single flute type on one diameter scale. Select a type to jump to its card. Product data comes from botek’s catalog, so confirm sizes and availability with us before you order.
Diameter range map
Diameter in millimeters, 0 to 120 mm.
- Solid carbide and brazed single flute gundrills
- Indexable-insert deep hole tools
- Counterboring tools
- Trepanning tools
Solid carbide and brazed single flute gundrills
Indexable-insert deep hole tools
Counterboring tools
Trepanning tools
Solid carbide and brazed single flute gundrills
For round deep holes from 0.5 mm to 60 mm, depending on the type.

Type 113
Solid carbide single flute gundrill with a kidney-shaped coolant channel, for small diameters.
Ø 0.5 to 12 mm0.0197 to 0.4724 in

Type 113-01
Stepped version of the solid carbide gundrill, with a kidney-shaped coolant channel.
From Ø 1.5 mmfrom 0.0591 inUpper diameter limit: see catalog.
Send your drawing
Type 113-HP
High-performance solid carbide gundrill, positioned by botek as an alternative to carbide twist drills.
Ø 0.7 to 12 mm0.0276 to 0.4724 in

Type 113-HP-M
High-performance solid carbide gundrill designed for use with MQL (minimum quantity lubrication).
Ø 2 to 12 mm0.0787 to 0.4724 in
Send your drawing
Type 110
Single flute gundrill with a brazed solid carbide tip and a kidney-shaped coolant channel. The widest range among the solid and brazed types.
Ø 1.85 to 51.2 mm0.0728 to 2.0157 in

Type 111
Drill head with a steel body, an inserted carbide cutting blade and bearing pads.
Ø 20 to 60 mm0.7874 to 2.3622 in
Send your drawing
Type 112
Stepped single flute gundrill with a solid carbide tip, for stepped holes in one operation. Coolant runs through a kidney-shaped channel or two holes, depending on diameter.
Ø 2 to 51.2 mm0.0787 to 2.0157 in
Send your drawingIndexable-insert deep hole tools
Indexable carbide inserts and guide pads for larger diameters, from 9.9 mm to 113.99 mm.

Type 01
Deep hole drilling tool with indexable inserts and guide pads. The drill diameter is set with a stop plate.
Ø 9.9 to 43.99 mm0.3898 to 1.7319 in

Type 01T
A narrower-range variant of Type 01 with indexable inserts, guide pads and diameter setting by stop plate.
Ø 12 to 17.99 mm0.4724 to 0.7082 in
Send your drawing

Type 02
Deep hole drilling tool with indexable inserts and guide pads for larger diameters, set with a stop plate. Larger diameters on request.
Ø 37 to 109.99 mm1.4567 to 4.3303 inA variant from 75 mm (2.9527 in) has its own order data.

Type 07
Deep hole drilling tool with indexable inserts and guide pads. The diameter is manufactured to your order. Larger diameters on request.
Ø 25 to 50.99 mm0.9842 to 2.0075 in

Type 07A
Same design principle as Type 07 for larger holes: indexable inserts, guide pads and a diameter manufactured to your order.
Ø 51 to 113.99 mm2.0079 to 4.4878 in
botek® America presented its Type 01 indexable single flute gundrill at IMTS 2026, and Modern Machine Shop covered it as a product feature.
Read the Modern Machine Shop articleCounterboring tools
Single flute tools that enlarge an existing hole, from 0.5 mm to 60.006 mm.

Type 113-02
Solid carbide single flute counterboring tool.
Ø 0.5 to 12 mm0.0197 to 0.4724 in
Send your drawing
Type 115
Single flute counterboring tool with a solid carbide tip. Chips are carried forward through a round tube.
Ø 1.85 to 51.2 mm0.0728 to 2.0157 in
Send your drawing
Type 115-01
Counterboring tool with a solid carbide tip.
Ø 1.85 to 51.2 mm0.0728 to 2.0157 in
Send your drawing
Type 115-03
Single flute counterboring tool with a guiding pilot and a solid carbide tip.
Ø 1.85 to 51.2 mm0.0728 to 2.0157 in
Send your drawing
Type 115-04
Counterboring tool with a guiding pilot, a steel body, an inserted carbide cutting blade and bearing pads.
Ø 12.001 to 60.006 mm0.4725 to 2.3624 in
Send your drawingTrepanning tools
Tools that cut an annular (ring-shaped) hole. Type 09 is a core cutter. From 11 mm to 100 mm.

Type 114
Trepanning gundrill with a carbide tip for producing annular (ring-shaped) holes.
Ø 11 to 50 mm0.4331 to 1.9685 in
Send your drawing
Type 08
Trepanning tool for annular holes in larger diameters.
Ø 25 to 100 mm0.9843 to 3.9370 in
Send your drawing
Type 09
Core cutter that cuts a ring and leaves a solid core.
Ø 37 to 70 mm1.4567 to 2.7559 in
Send your drawingWhich single flute gundrill type fits your hole?
Start from what the hole needs. Each row names the botek types to look at first.
| Your situation | Start with type | Diameter range |
|---|---|---|
| Very small holes in solid carbide | 113 | 0.5 to 12 mm |
| An alternative to carbide twist drills | 113-HP | 0.7 to 12 mm |
| Drilling with MQL | 113-HP-M | 2 to 12 mm |
| Wide diameter range with a brazed carbide tip | 110 | 1.85 to 51.2 mm |
| Larger head with an inserted carbide blade and bearing pads | 111 | 20 to 60 mm |
| Stepped hole in one operation | 112, 113-01 | 2 to 51.2 mm; 113-01 from 1.5 mm |
| Indexable inserts, diameter set by stop plate | 01, 01T, 02 | 9.9 to 109.99 mm |
| Indexable inserts, diameter made to order | 07, 07A | 25 to 113.99 mm |
| Enlarging an existing hole | 113-02, 115, 115-01, 115-03, 115-04 | 0.5 to 60.006 mm |
| Ring-shaped hole or solid core | 114, 08, 09 | 11 to 100 mm |
Depth, material, tolerance and machine make the final call. Send your drawing or read how to choose a gundrill.
Single flute gundrill terms explained
The words used on the cards above, in plain terms.
Solid carbide gundrill
Cutting head made of solid carbide. In botek’s range these types cover 0.5 to 12 mm.
Brazed carbide tip
A carbide cutting tip brazed onto the tool body.
Indexable insert
A carbide insert clamped on the tool. When the edge wears, the insert is changed instead of regrinding the whole tool.
Guide pads
Pads on the cutting head that guide the tool and support it against the hole wall.
Kidney-shaped coolant channel
A passage inside the tool that carries coolant to the cutting edge. Chips leave through the V-shaped flute on the outside.
Stepped gundrill
Drills two diameters in one pass, so a stepped hole needs one operation.
Counterboring tool
Enlarges an existing hole to a larger diameter. Some versions have a guiding pilot.
Trepanning tool
Cuts a ring-shaped (annular) hole and leaves a solid core. Type 09 is a core cutter.
MQL
Minimum quantity lubrication: cutting fluid in very small amounts. Type 113-HP-M is designed for it.
What to send before you ask about single flute gundrills
The more we know about the hole, the easier it is to narrow the choice.
- Drawing of the part, with the hole diameter and tolerance.
- Hole depth, and whether it is a blind or a through hole.
- Workpiece material and its condition, such as hardness.
- Machine and coolant system: CNC lathe, machining center or dedicated deep hole machine, and the coolant pressure available.
- Quantity and how often you repeat the order.
- Your current tool, if you already drill this hole.
No complete drawing yet?
Describe the hole and what you want to improve. An application engineer takes it from there.
Send your drawingKnow your type? Use the order or inquiry form:
Types 110, 113 and 113-HPTypes 01, 02, 07 and 07AOr call (630) 893-5300
Accessories for single flute gundrills
Bushings, whipguide bushes and sealing discs support the tool in the machine. Sizes below are as listed by botek.
| Picture | Item | Fits or range |
|---|---|---|
![]() | Rotating coolant connector | For tools with internal coolant supply, Ø 12 to 115 mm (0.4724 to 4.5276 in) |
![]() | Clamping cone | Workpiece reception |
![]() | Drill bush holder | Suits drill bushes to DIN 179A |
![]() | Drill bushings | DIN 179 extended, steel, hardened throughout |
![]() | Whipguide bush | Ø 1.850 to 32.609 mm (0.0728 to 1.2838 in) |
![]() | Whipguide bush, small range | Ø 1.850 to 12.399 mm (0.0728 to 0.4881 in) |
![]() | Whipguide bush, formed type | Single flute gundrills Ø 3.960 to 50.000 mm (0.1559 to 1.9685 in) |
![]() | Sealing disc | Single flute gundrills Ø 1.850 to 49.999 mm (0.0728 to 1.9685 in) |
![]() | Special sealing disc | Single flute gundrills Ø 2.900 to 40.999 mm (0.1141 to 1.6141 in) |
Also see the coolant pressure gauging kit and the grinding machines and fixtures for regrinding single flute gundrills.
Learn how gundrilling works before you specify
Background from our technical guides.
Frequently asked questions
What is a single flute gundrill?
A single flute gundrill is a deep hole drilling tool with one cutting edge and an internal coolant channel. Coolant is pumped through the tool to the cutting edge and carries the chips out along a V-shaped flute on the outside of the tool. It is used for deep, straight holes in metal parts.
Is a gundrill the same as a gun drill?
Yes. Gundrill and gun drill name the same tool, and shops use both spellings. This page uses gundrill, in line with the rest of botek® America’s content.
Can I order single flute gundrills online?
botek’s webshop on botek.de lists selected types, and the cards above link to it where it does. Delivery terms for US orders can differ, so send your drawing and an application engineer will advise on the tool and how to order. For Types 110, 113 and 113-HP, and Types 01, 02, 07 and 07A, you can also use the detailed order or inquiry form, which goes to botek® America.
Can single flute gundrills be reground?
Gundrills can be reground instead of replaced, depending on tool type and wear. botek® America regrinds at its Roselle, Illinois facility. Send the tool type and diameter and we will tell you whether your tool can be reground. See the regrinding service.
What if no standard type fits my hole?
Send your drawing with the hole diameter, depth, tolerance and material. botek designs special tools, and the custom gundrill specification page explains what we need.
Are sizes listed in inches?
Each type lists its diameter range in millimeters with the inch equivalent, as published by botek. Confirm the exact diameters you need with an application engineer before you order.
Not sure which single flute gundrill you need?
Upload your drawing and describe the hole. An application engineer will review it and come back to you.











