Deep hole drilling tools

botek® America offers single flute gundrills in solid carbide, brazed-tip and indexable designs, with diameters from 0.5 mm (0.0197 in) up to 113.99 mm (4.4878 in). Pick a type below, or send your drawing and an application engineer will help match the tool to your hole. New to gundrilling? Read our gundrilling process guide.

20 tool typessolid carbide, brazed, indexable
Ø 0.5 to 113.99 mm0.0197 to 4.4878 in
Regrinding in Roselle, ILat our US facility

Why buy single flute gundrills from botek® America

botek® America is the U.S. division of botek Präzisionsbohrtechnik GmbH. We bring botek deep hole drilling tools to US shops and back them with engineering and service from Roselle, Illinois.

Application engineering

Send your drawing, material and hole requirements. An application engineer reviews them and helps you choose the tool type and diameter.

Submit your application

Regrinding in Roselle

Worn gundrills can be reground at our Roselle, Illinois facility instead of replaced. Tell us the tool type and diameter and we confirm what is possible.

See the regrinding service

Test on your application

Customer testing and trials let you see how a tool performs on your own application.

See customer testing

Special tools to your drawing

If no standard type fits, send a drawing. botek designs special tools, and the specification page explains what we need.

How to specify a custom tool

Single flute gundrills by type and diameter range

The range map shows every botek single flute type on one diameter scale. Select a type to jump to its card. Product data comes from botek’s catalog, so confirm sizes and availability with us before you order.

Diameter range map

Diameter in millimeters, 0 to 120 mm.

  • Solid carbide and brazed single flute gundrills
  • Indexable-insert deep hole tools
  • Counterboring tools
  • Trepanning tools
0 mm20406080100120

Solid carbide and brazed single flute gundrills

Type 113
0.5 to 12 mm
Type 113-01
from 1.5 mm
Type 113-HP
0.7 to 12 mm
Type 113-HP-M
2 to 12 mm
Type 110
1.85 to 51.2 mm
Type 111
20 to 60 mm
Type 112
2 to 51.2 mm

Indexable-insert deep hole tools

Type 01
9.9 to 43.99 mm
Type 01T
12 to 17.99 mm
Type 02
37 to 109.99 mm
Type 07
25 to 50.99 mm
Type 07A
51 to 113.99 mm

Counterboring tools

Type 113-02
0.5 to 12 mm
Type 115
1.85 to 51.2 mm
Type 115-01
1.85 to 51.2 mm
Type 115-03
1.85 to 51.2 mm
Type 115-04
12.001 to 60.006 mm

Trepanning tools

Type 114
11 to 50 mm
Type 08
25 to 100 mm
Type 09
37 to 70 mm

Solid carbide and brazed single flute gundrills

For round deep holes from 0.5 mm to 60 mm, depending on the type.

botek America Type 113-01 stepped solid carbide gundrill for stepped deep holes, from 1.5 mm
Solid carbideStepped

Type 113-01

Stepped version of the solid carbide gundrill, with a kidney-shaped coolant channel.

From Ø 1.5 mmfrom 0.0591 inUpper diameter limit: see catalog.

Send your drawing
botek America Type 113-HP-M solid carbide single flute gundrill for MQL deep hole drilling, 2 to 12 mm
Solid carbideHigh performanceMQL

Type 113-HP-M

High-performance solid carbide gundrill designed for use with MQL (minimum quantity lubrication).

Ø 2 to 12 mm0.0787 to 0.4724 in

Send your drawing
botek America Type 112 stepped single flute gundrill with solid carbide tip, 2 to 51.2 mm
Brazed carbide tipStepped

Type 112

Stepped single flute gundrill with a solid carbide tip, for stepped holes in one operation. Coolant runs through a kidney-shaped channel or two holes, depending on diameter.

Ø 2 to 51.2 mm0.0787 to 2.0157 in

Send your drawing

Indexable-insert deep hole tools

Indexable carbide inserts and guide pads for larger diameters, from 9.9 mm to 113.99 mm.

botek® America presented its Type 01 indexable single flute gundrill at IMTS 2026, and Modern Machine Shop covered it as a product feature.

Read the Modern Machine Shop article

Counterboring tools

Single flute tools that enlarge an existing hole, from 0.5 mm to 60.006 mm.

botek America Type 115 single flute counterboring tool with solid carbide tip, 1.85 to 51.2 mm
Carbide tipCounterboring

Type 115

Single flute counterboring tool with a solid carbide tip. Chips are carried forward through a round tube.

Ø 1.85 to 51.2 mm0.0728 to 2.0157 in

Send your drawing
botek America Type 115-03 counterboring tool with guiding pilot and carbide tip, 1.85 to 51.2 mm
Carbide tipCounterboringGuiding pilot

Type 115-03

Single flute counterboring tool with a guiding pilot and a solid carbide tip.

Ø 1.85 to 51.2 mm0.0728 to 2.0157 in

Send your drawing
botek America Type 115-04 counterboring tool with guiding pilot, carbide blade and bearing pads, 12 to 60 mm
Carbide bladeCounterboringGuiding pilot

Type 115-04

Counterboring tool with a guiding pilot, a steel body, an inserted carbide cutting blade and bearing pads.

Ø 12.001 to 60.006 mm0.4725 to 2.3624 in

Send your drawing

Trepanning tools

Tools that cut an annular (ring-shaped) hole. Type 09 is a core cutter. From 11 mm to 100 mm.

botek America Type 114 trepanning gundrill with carbide tip for annular holes, 11 to 50 mm
Carbide tipTrepanning

Type 114

Trepanning gundrill with a carbide tip for producing annular (ring-shaped) holes.

Ø 11 to 50 mm0.4331 to 1.9685 in

Send your drawing

Which single flute gundrill type fits your hole?

Start from what the hole needs. Each row names the botek types to look at first.

Your situationStart with typeDiameter range
Very small holes in solid carbide1130.5 to 12 mm
An alternative to carbide twist drills113-HP0.7 to 12 mm
Drilling with MQL113-HP-M2 to 12 mm
Wide diameter range with a brazed carbide tip1101.85 to 51.2 mm
Larger head with an inserted carbide blade and bearing pads11120 to 60 mm
Stepped hole in one operation112, 113-012 to 51.2 mm; 113-01 from 1.5 mm
Indexable inserts, diameter set by stop plate01, 01T, 029.9 to 109.99 mm
Indexable inserts, diameter made to order07, 07A25 to 113.99 mm
Enlarging an existing hole113-02, 115, 115-01, 115-03, 115-040.5 to 60.006 mm
Ring-shaped hole or solid core114, 08, 0911 to 100 mm

Depth, material, tolerance and machine make the final call. Send your drawing or read how to choose a gundrill.

Single flute gundrill terms explained

The words used on the cards above, in plain terms.

Solid carbide gundrill

Cutting head made of solid carbide. In botek’s range these types cover 0.5 to 12 mm.

Brazed carbide tip

A carbide cutting tip brazed onto the tool body.

Indexable insert

A carbide insert clamped on the tool. When the edge wears, the insert is changed instead of regrinding the whole tool.

Guide pads

Pads on the cutting head that guide the tool and support it against the hole wall.

Kidney-shaped coolant channel

A passage inside the tool that carries coolant to the cutting edge. Chips leave through the V-shaped flute on the outside.

Stepped gundrill

Drills two diameters in one pass, so a stepped hole needs one operation.

Counterboring tool

Enlarges an existing hole to a larger diameter. Some versions have a guiding pilot.

Trepanning tool

Cuts a ring-shaped (annular) hole and leaves a solid core. Type 09 is a core cutter.

MQL

Minimum quantity lubrication: cutting fluid in very small amounts. Type 113-HP-M is designed for it.

What to send before you ask about single flute gundrills

The more we know about the hole, the easier it is to narrow the choice.

  • Drawing of the part, with the hole diameter and tolerance.
  • Hole depth, and whether it is a blind or a through hole.
  • Workpiece material and its condition, such as hardness.
  • Machine and coolant system: CNC lathe, machining center or dedicated deep hole machine, and the coolant pressure available.
  • Quantity and how often you repeat the order.
  • Your current tool, if you already drill this hole.

No complete drawing yet?

Describe the hole and what you want to improve. An application engineer takes it from there.

Send your drawing

Know your type? Use the order or inquiry form:

Types 110, 113 and 113-HPTypes 01, 02, 07 and 07A

Or call (630) 893-5300

Accessories for single flute gundrills

Bushings, whipguide bushes and sealing discs support the tool in the machine. Sizes below are as listed by botek.

PictureItemFits or range
botek America rotating coolant connector for single flute gundrills, 12 to 115 mmRotating coolant connectorFor tools with internal coolant supply, Ø 12 to 115 mm (0.4724 to 4.5276 in)
botek America clamping cone for single flute gundrill set-upClamping coneWorkpiece reception
botek America drill bush holder for DIN 179A bushes, single flute gundrillingDrill bush holderSuits drill bushes to DIN 179A
botek America drill bushing, DIN 179 extended, for single flute gundrillsDrill bushingsDIN 179 extended, steel, hardened throughout
botek America whipguide bush for single flute gundrills, 1.850 to 32.609 mmWhipguide bushØ 1.850 to 32.609 mm (0.0728 to 1.2838 in)
botek America small-range whipguide bush for single flute gundrills, 1.850 to 12.399 mmWhipguide bush, small rangeØ 1.850 to 12.399 mm (0.0728 to 0.4881 in)
botek America formed whipguide bush for single flute gundrills, 3.960 to 50.000 mmWhipguide bush, formed typeSingle flute gundrills Ø 3.960 to 50.000 mm (0.1559 to 1.9685 in)
botek America sealing disc for single flute gundrills, 1.850 to 49.999 mmSealing discSingle flute gundrills Ø 1.850 to 49.999 mm (0.0728 to 1.9685 in)
botek America special sealing disc for single flute gundrills, 2.900 to 40.999 mmSpecial sealing discSingle flute gundrills Ø 2.900 to 40.999 mm (0.1141 to 1.6141 in)

Also see the coolant pressure gauging kit and the grinding machines and fixtures for regrinding single flute gundrills.

Frequently asked questions

What is a single flute gundrill?

A single flute gundrill is a deep hole drilling tool with one cutting edge and an internal coolant channel. Coolant is pumped through the tool to the cutting edge and carries the chips out along a V-shaped flute on the outside of the tool. It is used for deep, straight holes in metal parts.

Is a gundrill the same as a gun drill?

Yes. Gundrill and gun drill name the same tool, and shops use both spellings. This page uses gundrill, in line with the rest of botek® America’s content.

Can I order single flute gundrills online?

botek’s webshop on botek.de lists selected types, and the cards above link to it where it does. Delivery terms for US orders can differ, so send your drawing and an application engineer will advise on the tool and how to order. For Types 110, 113 and 113-HP, and Types 01, 02, 07 and 07A, you can also use the detailed order or inquiry form, which goes to botek® America.

Can single flute gundrills be reground?

Gundrills can be reground instead of replaced, depending on tool type and wear. botek® America regrinds at its Roselle, Illinois facility. Send the tool type and diameter and we will tell you whether your tool can be reground. See the regrinding service.

What if no standard type fits my hole?

Send your drawing with the hole diameter, depth, tolerance and material. botek designs special tools, and the custom gundrill specification page explains what we need.

Are sizes listed in inches?

Each type lists its diameter range in millimeters with the inch equivalent, as published by botek. Confirm the exact diameters you need with an application engineer before you order.

Not sure which single flute gundrill you need?

Upload your drawing and describe the hole. An application engineer will review it and come back to you.

Phone: (630) 893-5300Email: info@botekamerica.comRoselle, Illinois