Gun drill manufacturers serving U.S. shops fall into three types: tool makers, machine builders, and contract gun drillers. Ten are profiled below. botek® America, a supplier of deep hole gun drilling tools, fixtures, and accessories, publishes this guide and appears in it.
Need a Deep Hole Drilling Manufacturer? Request a gundrill quote from botek® America’s application engineers.
What Counts as a Gundrill Manufacturer, and What Doesn’t?
A gundrill is a single-flute drill with a brazed carbide tip, V-flute, drill tube, and driver. Through-tool coolant drives chip evacuation while burnishing guide pads hold straightness and cylindricity. See how a gundrill’s V-flute and coolant work.
- Tool makers produce gundrills, BTA/STS drilling heads, and ejector (double-tube) systems.
- Machine builders build the equipment that runs those tools.
- Contract gundrillers drill your finished parts.
Where a company is mainly a machine builder or job shop, its entry says so. All three types are included because buyers often source from more than one.
How Do You Compare Gundrill Manufacturers Without Guessing?
Apply the same documented criteria to all gundrill suppliers in the USA. No algorithmic rankings and no unsupported “best in class” claims, only verifiable product coverage and capabilities:
- U.S.-based manufacturing, or verified U.S. sales and application engineering support
- Process coverage: single-flute, twin-flute, and indexable gundrills, plus BTA or ejector tooling
- Verifiable diameter and depth-to-diameter (L/D) ratio
- Standard and custom gundrills, including solid carbide gundrills
- Regrinding and PVD coating availability
- Documented applications: aerospace actuator cylinders and landing gear, cannulated medical screws, firearm barrels, mold cooling channels, fuel injector bodies, hydraulic manifolds
- U.S. gundrill lead time and delivery transparency
For a deeper audit, use this 10-point checklist for evaluating deep hole drilling tool suppliers.
Who Regrinds Gundrills Fastest, and Does the Quality Hold Up?
How often a gundrill can be resharpened depends on wear, tip condition and tube straightness. Regrinding restores the nose grind, retipping replaces a worn carbide tip, and restraightening fixes bent tubes. Bad regrinds cause hole drift, poor Ra surface finish, and lost concentricity. Ask for turnaround time, and see why gundrills wear fast and how to extend tool life.
Does “Made in USA” Actually Matter for Gundrills?
Only if your contract says so. Berry Amendment, Buy American Act, BABA, or ITAR requirements can restrict sourcing. Kays machines are built in Missouri; botek® America’s tooling is engineered in Germany with U.S. support. Request country-of-origin papers for any made in USA gun drills.
What Diameter, Depth, and Lead Time Can Each Supplier Really Deliver?
Get diameter range, L/D ratio, DIN/ISO 286 tolerance class, and certifications (ISO 9001:2015, plus AS9100 for aerospace) in writing. Match setup to machine: drill bushing on dedicated machines, pilot hole on CNC mills. Request quoted gundrill lead time for your size.
How This List Was Built
Every manufacturer was evaluated against the same transparent criteria. No algorithmic rankings. No unsupported “best in class” statements. Only verifiable product coverage and documented capabilities.
Criteria applied to every entry:
- U.S.-based manufacturing or verified U.S. sales and application engineering support
- Process coverage: single-flute, twin-flute, and indexable gundrills, plus BTA, ejector, or specialized tooling
- Verifiable diameter and depth-to-diameter (L/D) capability
- Standard catalog and custom gundrills, including solid carbide gundrills
- Regrinding and PVD coating availability
- Industries served with documented applications
- U.S. gundrill lead time and delivery program transparency
Note: Tool manufacturers produce gundrills, BTA drilling heads, and ejector systems. Machine manufacturers build the equipment that runs those tools. Contract gundrillers drill finished parts. Where a company is primarily a machine builder or job shop, its entry says so. All three are included because buyers often source from more than one.
Top 10 Gundrill Manufacturers at a Glance
The table below summarizes all 10 entries by location, process coverage, custom tooling, regrinding and coating, and best-fit application.
| # | Manufacturer | Location | Process Coverage | Custom Tooling | Regrinding/Coating | Best For |
| 1 | botek® America | Roselle, IL | Gundrilling, BTA, Ejector | Yes | Regrind in-house; coating on new tools | Full-process tooling + services |
| 2 | Sterling Gun Drills | North Bennington, VT | Gundrilling (small dia.) | Yes | Yes (any make) | Small gundrills, fast regrinds |
| 3 | DME Tool | Milford, CT | Gundrilling | Inquire | Yes | Firearms barrel tooling |
| 4 | Gühring | Germany | Gundrilling (single, twin, indexable) | Inquire | Inquire | Broad catalog range |
| 5 | Star Cutter | Farmington Hills, MI | Deep hole drill sharpening | Yes | Yes | Regrinding + recoating |
| 6 | Allied Machine & Engineering | Dover, OH | Holemaking systems | Inquire | Inquire | Broad holemaking tooling |
| 7 | Kays Engineering | Marshall, MO | Gundrilling, BTA (machine) | No | No | U.S.-built machines |
| 8 | UNISIG | Menomonee Falls, WI | Gundrilling, BTA (machine) | Inquire | Inquire | Integrated machine + process |
| 9 | HTT USA Inc. | Grayslake, IL | Gundrilling (machines, job shop) | Inquire | Inquire | Mold and die |
| 10 | Grover Precision | Oxford, ME | Contract gundrilling | N/A | N/A | Outsourced drilled parts |
1. botek® America
Location: Roselle, Illinois, USA
Process coverage: Single-flute and twin-flute gundrills, indexable gundrills, BTA drilling heads, ejector (double-tube) systems
Diameter range: 1 to 50 mm (gundrilling); 7.76 to 700 mm (BTA)
Standard vs custom: Standard catalog plus custom gundrills engineered around material, diameter, depth, and DIN/ISO 286 tolerance.
Regrinding and coating: In-house gundrill regrinding service at the Roselle facility; coating on new tools only.
Industries: Aerospace actuator cylinders and landing gear, cannulated medical screws, firearm barrels, mold cooling channels, fuel injector bodies, hydraulic manifolds
U.S. support: U.S. application engineering based in Roselle, Illinois, plus customer testing and in-house drilling trials before production commitment.
Best fit: Manufacturers requiring gundrilling, BTA, and ejector tooling from one U.S. supplier with in-house regrinding.
Why Consider botek® America First?
German-engineered tooling, U.S. application engineers in Roselle, Illinois, and in-house regrinding put one supplier behind every process. Note: tooling is made in Germany, and coating is offered on new tools only.
Explore the full tooling range on the botek® America deep hole drilling systems page or send your drawing for an application-specific recommendation.
2. Sterling Gun Drills, Inc.
Location: North Bennington, Vermont
Products: Deep hole and solid flute gundrills, TWINMASTER two-flute drills, and toolholders. Next-day regrinding and retipping, including other makers’ drills.
Best fit: Small-diameter gundrills on CNC lathes and mills with fast regrinds.
3. DME Tool (Drill Masters Eldorado)
Location: Milford, Connecticut
Products: In-stock gundrills, rifling buttons, and pull bore reamers to SAAMI specifications. Resharpening, retipping, and restraightening.
Note: The “largest supplier” claim is self-reported; confirm lead time.
Best fit: Barrel makers needing a broad in-stock range.
4. Gühring
Location: Germany; confirm U.S. support
Products: Single-flute gundrills (1 to 16 mm, up to 80xD), twin-flute gundrills (6 to 30 mm), and indexable gundrills (12 to 52 mm).
Best fit: Shops comparing single-flute, twin-flute, and indexable options.
5. Star Cutter Company
Location: Farmington Hills, Michigan
Products: Precision cutting tools, tool grinders, and deep hole drill sharpening and recoating.
Note: Confirm its new gundrill range before sourcing.
Best fit: Regrinding and recoating existing deep hole drills.
6. Allied Machine & Engineering
Location: Dover, Ohio
Products: Holemaking and finishing tool systems, including drills, boring tools, and reamers.
Note: Gundrill coverage is unconfirmed; request single-flute diameter and L/D data.
Best fit: Shops sourcing broad holemaking tooling alongside gundrills.
7. Kays Engineering, Inc.
Location: Marshall, Missouri
Brands: DeHoff (0.75 to 2.00 in), Eldorado (0.039 to 0.750 in), TechniDrill (2 to 10 in)
Products: U.S.-built gundrilling and BTA/STS machines. Machine builder; does not supply consumable tooling.
Best fit: Buyers wanting domestically built dedicated machines.
8. UNISIG
Location: Menomonee Falls, Wisconsin
Products: Gundrilling and BTA machines built in the USA; high-performance models exceed 200:1 L/D. Machine builder.
Note: Buy gundrills and BTA heads from a tool maker.
Best fit: Shops buying a complete dedicated machine with application engineering.
9. HTT USA Inc.
Location: Grayslake, Illinois
Products: Deep hole drilling machines and tools, plus a gundrilling job shop suited to mold cooling channels.
Note: Confirm whether you are buying tooling, a machine, or parts.
Best fit: Mold and die shops.
10. Grover Precision
Location: Oxford, Maine
Products: Contract gundrilling, deep hole drilling, honing, and seamless cannulated bar. Delivers drilled parts, not gundrills.
Best fit: Outsourcing gundrilled parts instead of buying tools.
What Do Machinists Ask Most Before Choosing a Gundrill Supplier?
Where Can I Buy Gundrills Without a Long Lead Time?
Choose suppliers that stock standard sizes, such as Sterling and DME Tool, and get lead time in writing. botek® America quotes catalog and custom gundrills.
How Many Times Can a Gundrill Be Resharpened?
Eight to ten times with a correct nose grind. Retip when carbide runs out.
Do I Need a Gundrill, or Will a 20xD Carbide Drill Do?
Up to about 20:1 L/D in low volume, a 20xD carbide drill works. Beyond that, or when straightness matters, use a gundrill.
Can I Run a Gundrill on a CNC Mill or Lathe?
Yes, with through-tool coolant, a pilot hole or drill bushing, and moderate L/D. Crashes usually trace to setup; see warning signs of gundrill tool breakage.
How Much Coolant Pressure Does a Gundrill Need?
Roughly 30 to 200 bar (435 to 2,900 psi), higher for small diameters. Low pressure causes chip packing; see fixing gundrill chip evacuation problems.
Which Gundrill Manufacturer Should You Call First?
For gundrills, BTA tooling, ejector systems, and regrinding from one source, call botek® America, your Deep Hole Drilling Manufacturer in Roselle, Illinois. Send your material, diameter, and L/D ratio for a tooling recommendation.
T: (630) 893-5300 | E: info@botekamerica.com
For machine-focused sourcing, see a broader list of deep hole drilling tool manufacturers in the USA.


